Neopost AS-710 - Page 112

112 User Manual Version 3.1
Protocol
code
Display message Cause
017 CHECKSUM ERROR ! RESET
PENVALUES
CODE: 17
Error in buffered RAM
Elimination
• Perform a default reset • If the error occurs again after
the default reset call service
Pos: 79.14 /Bedienungsan leitungen/Gerät e spezifisch/Dr ucker/Error Messages/ 19_CHECKSUM_ERROR_! @ 2\ mod_1265896786253_91 2.doc @ 11978 @
Protocol
code
Display message Cause
019 CHECKSUM ERROR ! RESET
DROPVALUES
CODE: 19
Error in buffered RAM
Elimination
• Perform a default reset • If the error occurs again after
the default reset call service
Pos: 79.15 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Error Messages/20_B UFFER_OVERFLOW ! @ 2\mod_1265618324295_912. doc @ 11317 @
Protocol
code
Display message Cause
020 BUFFER OVERFLOW !
CODE: 20
Overflow of the received buffer
Elimination
• Check if the data cable is
connected correctly at the
printer and at the PC
• Exchange the data cable
Pos: 79.16 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Error Messages/21_ UNPRINTED_ADRESSES!_FINIS H_THE_JOB @ 2\mod_1265618418236 _912.doc @ 11320 @
Protocol
code
Display message Cause
021 UNPRINTED ADDRESSES!FINISH
THE JOB
CODE: 21
Address has not been
completely printed
Elimination
• Do not carry out any
modifications in the printer
menu during the print job
Pos: 79.17 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Error Messages/22_P ROGRAM_ERROR_MAKE_DEFAULT_RESE T @ 2\mod_1265618469973_912. doc @ 11323 @