114 User Manual Version 3.1
Protocol
code
Display message Cause
026 ADDRESS TOO LONG CHECK TOP
MARGIN
CODE:26
Print layout sent from the PC
exceeds paper size set in the
printer (in transport direction)
Elimination
• Measure actual paper size
• Compare paper size in
transport direction with size
set in printer
• Compare paper size in PC
software with size set in
printer
• Check if a wrong paper size
is locked
• Check TOP MARGIN setting in
printer menu
Pos: 79.22 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Error Messages/27b_D C_Motor_Control ler_FAULT!_CALL_SE RVICE!_SHUTTLE_HEAD _ONLY @ 2\mod_1265618703312_ 912.doc @ 11338 @
Protocol
code
Display message Cause
027 DC MOTOR CONTROLER FAULT!
CALL SERVICE!
CODE: 27
Motor controller damaged
Elimination
• Call service
Pos: 79.23 /Bedienungsan leitungen/Gerät e spezifisch/Dr ucker/Error Messages/ 28_ERROR_PEN_BOARD#_C HECK_CABLE_OR_BOARD @ 2\mod_1265618803191_912. doc @ 11344 @
Protocol
code
Display message Cause
028 ERROR PEN BOARD CALL
SERVICE
CODE: 28
Error on the pen board
Elimination
• Check for the SCSI cable if
any contacts are bent
• Make sure that the SCSI cable
is tightly screwed to the
printer and the print unit
• Call service
Pos: 79.24 /Bedienungsan leitungen/Gerät e spezifisch/Dr ucker/Error Messages/ 29_ERROR_CARTRIDGE_#_C HECK_CONNECTION @ 2\mod_126 5618885914_912.doc @ 11347 @
To Next Page
Loading...
