Protocol
code
Display message Cause
049 SAFETY COVER OPEN!
CODE: 49
The safety cover is open
Elimination
• Close the safety cover
Pos: 79.34 /Bedienungsan leitungen/Gerät e spezifisch/Druc ker/Error Messages/50_P AGE_DATA_TOO_LARGE_ RESET_THE_PRINTER @ 3\mod_1297873197378_91 2.doc @ 30385 @
Protocol
code
Display message Cause
050 PAGE DATA TOO LARGE RESET
THE PRINTER!
CODE: 50
Data sent from the PC is too
large
Elimination
• Set the menu PAGE DATA
SIZE to maxim
• Check if the data cable is
connected correctly at the
printer and at the PC
• Turn off the printer and then
on again
Pos: 79.35 /Bedienungsan leitungen/Gerät e spezifisch/Dr ucker/Error Messages/ 51_FONT_LOADING_ERROR:_ RAM_MEMORY_IS_FULL @ 2\mod_1265620546317_912. doc @ 11420 @
Protocol
code
Display message Cause
051 FONT LOADING ERROR RAM
MEMORY IS FULL!
CODE: 51
Insufficient memory for the font
Elimination
• Reduce number of fonts used
in print job
Pos: 79.36 /Bedienungsan leitungen/Gerät e spezifisch/Dr ucker/Error Messages/ 52_FONT_LOADING_ERROR:_W RONG_DATA/TIMEOU T @ 2\mod_1265620582349_912. doc @ 11423 @
Protocol
code
Display message Cause
052 FONT LOADING ERROR WRONG
DATA/TIMEOUT
CODE: 52
Undefined or faulty data were
detected by the printer
Elimination
• Check if the data cable is
connected correctly at the
printer and at the PC
• Check if you use the official
printer driver
• Try to run the print job from
a different PC
• Call service
Pos: 79.37 /Bedienungsan leitungen/Gerät e spezifisch/Dr ucker/Error Messages/ 53_ERROR:_NON-Existen t_Font_Selected! @ 2\mod_1265620640678_91 2.doc @ 11426 @
To Next Page
Loading...
