Scanning a Paper Form
OmniForm Procedures 29
• Select
Detect paper color automatically
if your form’s
background has color and you want OmniForm to recognize
the color during OCR. If you deselect this option, the form’s
background will be detected as white.
• Select
Show Proofreader after recognition
to open the
Proofreader after your form has been recognized. See
“Proofing a Form” on page 32 for more information.
•Click
Font Mapping...
to open the Font Mapping dialog box. In
this dialog box you select options to retain the font
characteristics of your form during OCR.
Select the fonts you want mapped to each font type and click
OK
when you are done.
10 Click
Options...
in the Scan Form dialog box and then click the
International
tab to make sure the appropriate language is
selected. If you need to change the language for your new form,
select an option in the
Language
drop-down list.
See “International Settings” on page 19 for more information on
international options.
Click
OK
to return to the Scan Form dialog box.
11 Click
OK
in the Scan Form dialog box to begin scanning.
OmniForm scans the form. The OmniForm window displays
the scanning, designing, and straightening progress if you
selected those options.
If your scanner does not allow you to stop the scanning process,
then the
Stop
button will be grayed out.
To Next Page
Loading...
Need help?
General
