Before making copies
2
d-Color MF25 2-53
2.6 Loading paper into the LCT
To load paper (LCT)
0 If the [Power] (auxiliary power) key is turned off, even while the main pow-
er switch is on, the LCT cannot be pulled out, even after the tray release
button is pressed. Be sure that the machine is turned on with the [Power]
(auxiliary power) key.
1 Press the tray release button.
2 Pull out the LCT.
3 Load the paper into the right side of
the LCT so that the side of the paper
to be printed on (the side facing up
when the package was unwrapped)
faces up.
?
How is curled paper loaded?
% Flatten the paper before loading
it.
, mark
Film
To Next Page
Loading...
Need help?
General