9
Replacing toner cartridges and staples and emptying waste containers
9-20 d-Color MF25
To clear jammed staples in finisher FS-603
0 If the message “Staple mode cannot be used.” appears, be sure to per-
form the following procedure.
If the following procedure is not followed and the paper is pulled out with
too much force, the stapler unit may be damaged.
1 Slide the finisher away from the ma-
chine.
2 Open the horizontal transport unit
cover, and then remove any misfed
paper.
3 Close the horizontal transport unit cover.
4 Open the misfeed-clearing guide for
the finisher, and then remove any
misfed paper.
To Next Page
Loading...
Need help?
General