11
Managing jobs (Job List)
11-10 d-Color MF25
To check the job settings
Job settings for stored jobs, jobs being printed, jobs queued to be printed
and held jobs can be checked.
1 In the Basic screen, touch [Job List].
The Job List screen appears.
2 Display the list containing the job whose settings are to be checked.
3 Select the job whose settings are to be checked, and then touch
[Check Job].
– If an incorrect job was selected, select a different job or touch the
button for the selected job again to deselect it.
– The Mode Check screen appears.
– The contents and number of Mode Check screens differ depending
on the job that was selected.
– The number to the left of [Back] indicates the number of the current-
ly displayed screen/the total number of screens.
– To display the previous screen, touch [Back]. To display the next
screen, touch [Fwd.].
4 To finish checking the settings, touch [Close] or [Exit], or press the [Re-
set] key.
– To return to the screen displayed before [Check Job] was touched,
touch [Close].
– To return to the Basic screen, touch [Exit] or press the [Reset] key.
To Next Page
Loading...
Need help?
General