12
Utility
12-50 d-Color MF25
Adjusting the starting print position at the left edge
The starting print position at the left edge of the paper (with respect to the
paper feed direction) for each paper tray can be adjusted.
Adjustments can be specified for each paper tray.
0 The starting print position is adjusted during manufacturing of the ma-
chine. Normally, this position will not need to be adjusted.
0 Only A4 v paper can be used to adjust the bypass tray.
1 Display the Administrator Setting screen.
– For details on displaying the Administrator Setting screen, refer to
“Displaying the Administrator Setting screen” on page 12-45.
2 Touch [1 System Setting].
The System Setting screen appears.
3 Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4 Touch [2 Printer Adjustment].
The Printer Adjustment screen appears.
5 Touch [2 Centering].
The Centering screen appears.
6 Touch the button for the paper tray to be set.
7 Press the [Start] key.
A test pattern is printed.
To Next Page
Loading...
Need help?
General