Olivetti d-Color MF25 User Manual

12
Utility
12-48 d-Color MF25
12.6 Adjusting the printer
Adjusting the starting print position at the leading edge position
The starting print position at the leading edge of each type of paper (with re-
spect to the paper feed direction) can be adjusted.
Adjustments can be specified for each paper type.
0 The starting print position is adjusted during manufacturing of the ma-
chine. Normally, this position will not need to be adjusted.
1 Display the Administrator Setting screen.
– For details on displaying the Administrator Setting screen, refer to
“Displaying the Administrator Setting screen” on page 12-45.
2 Touch [1 System Setting].
The System Setting screen appears.
3 Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4 Touch [2 Printer Adjustment].
The Printer Adjustment screen appears.
5 Touch [1 Leading Edge Adjustment].
The Leading Edge Adjustment screen appears.
6 Touch the button for the paper type to be set.
7 Press the [Start] key.
A test pattern is printed.

Olivetti d-Color MF25 Specifications

General

Brand	Olivetti
Model	d-Color MF25
Category	Copier
Language	English