Copy paper/original documents
7
d-Color MF25 7-11
To specify a paper size (set size settings)
The paper size for the 1st tray and the bypass tray can be set so that the pa-
per tray can be used with the specified paper size.
This is useful, for example, when the size of the paper that is loaded cannot
be automatically detected (such as with postcards or paper in inch sizes).
The following procedure describes how to specify the postcard setting for
the 1st tray.
1 In the Basic screen, touch [Paper].
The Paper screen appears.
2 Touch the button for the 1st tray.
– To set the paper size for the bypass tray, touch the button for the
bypass tray.
3 Touch [Change Tray Settings].
To Next Page
Loading...
Need help?
General