Additional copy operations
4
d-Color MF25 4-25
4.7 Specifying control panel settings (Accessibility mode)
This section contains details on the procedures for specifying control panel
settings and adjusting the touch panel.
Displaying the Accessibility Setting Screen
% Press the [Accessibility] key.
The Accessibility Setting screen ap-
pears.
To set the “Key Repeat Start/Interval Time” function
The length of time until the value begins to change after a touch panel button
is held down and the length of time for the value to change to the next
number can be specified. The factory default setting for “Time To Start” is
0.8 second and the factory default setting for “Interval” is 0.3 second.
0 The settings specified for the “Key Repeat Start/Interval Time” function
are only applied in the Enlarge Display mode.
1 Display the Accessibility Setting screen. (To display the screen, refer to
page 4-25)
2 Touch [Key Repeat Start/Interval Time] or press the [1] key in the key-
pad.
To Next Page
Loading...
Need help?
General