2
Before making copies
2-56 d-Color MF25
2.7 Loading paper into the bypass tray
Paper can be fed manually through the bypass tray if you wish to copy onto
paper that is not loaded into a paper tray, or if you wish to copy onto thick
paper, postcards, envelopes, overhead projector transparencies or label
sheets.
To load paper (bypass tray)
1 Open the bypass tray.
– When loading large-sized paper,
pull out the tray extension.
2 With the side to be printed on facing down, insert the paper as much
as possible into the feed slot.
3 Slide the lateral guides to fit the size
of paper being loaded.
4 Touch [Change Tray Settings], and then select the setting for the paper.
Tray extention
Lateral guides
To Next Page
Loading...
Need help?
General