3
Basic copy operations
3-38 d-Color MF25
Slightly reducing the copy (“Minimal” setting)
The copy of a document where the image is printed to the edges of the paper
can be slightly reduced so that no part of the image is cut off in the copy.
0 The default setting is “×1.0”.
0 Touch [+] to enlarge the zoom ratio, and touch [–] to reduce the zoom ra-
tio in × 0.001 increments.
0 Select the “Minimal” setting to produce a copy with the original image
slightly reduced (×0.930).
0 The zoom ratio of the “Minimal” setting can be changed (between ×0.900
and ×0.999). For details on changing the zoom ratio for the “Minimal” set-
ting, refer to “Storing the desired zoom ratio” on page 3-46.
1 In the Basic screen, touch [Zoom].
The Zoom screen appears.
2 Touch [Minimal].
3 Touch [OK].
The Basic screen appears again.
To Next Page
Loading...
Need help?
General