7
Copy paper/original documents
7-22 d-Color MF25
To specify a setting for special paper
If a setting for special paper, such as overhead projector transparencies and
other special paper, is selected for a paper tray, that tray is not selected au-
tomatically with the “Auto Paper Select” setting or the ATS feature. However,
a paper tray set to “Single Side Only” is given priority when the “Auto Paper
Select” setting is specified or when the paper trays are switched automati-
cally.
The following procedure describes how to specify the setting for oversized
paper loaded into the 1st tray.
1 In the Basic screen, touch [Paper].
The Paper screen appears.
2 Touch the button for the 1st tray.
– To set the paper size for the bypass tray, touch the button for the
bypass tray.
3 Touch [Change Tray Settings].
To Next Page
Loading...
Need help?
General