Additional copy operations
4
d-Color MF25 4-5
2 After checking the settings, touch [Job End] or press the [Mode Check]
key.
The Basic screen appears again.
!
Detail
There are four Mode Check screens.The number of the currently dis-
played screen appears to the right of the screen title.
To display the previous screen, touch [Back]. To display the next screen,
touch [Fwd.].
The buttons for functions where the setting has been changed from the
default appear selected.
To change the settings
1 Press the [Mode Check] key.
2 Touch [Back] or [Fwd.] until the button for the function to be changed
is displayed.
3 Touch the button for the setting that you wish to change.
The screen for specifying the setting appears.
4 Follow the appropriate procedure to change the setting.
To Next Page
Loading...
Need help?
General