Basic copy operations
3
d-Color MF25 3-51
To select double-sided copies
0 The default setting is “1%1”.
0 If “2%2” is selected, specify the position of the binding margin and the
loading orientation for the document, otherwise the copies will not be
printed as desired.
For details on specifying the position of the binding margin, refer to “Se-
lecting the position of the binding margin (Margin settings)” on
page 3-25.
For details on specifying the document orientation, refer to “Selecting the
document orientation (Original Direction settings)” on page 3-22.
0 Press the [Stop] key while a document is being scanned or a job is being
printed.
0 For details on using the original glass to scan multiple document pages,
refer to “Scanning a multi-page document from the original glass” on
page 3-15.
1 In the Basic screen, touch [Simplex/Duplex].
The Simplex/Duplex screen appears.
2 Touch [1%2] or [2%2].
To Next Page
Loading...
Need help?
General