12
Utility
12-42 d-Color MF25
Network setting
Copier setting
Parameter Description
TCP/IP Setting Specify settings for using the network. For details, refer to the Net-
work Scanner Operations of the user manual.
NetWare Setting
IPP Setting
FTP Setting
SMB Setting
AppleTalk Setting
LDAP Setting
E-Mail Setting
Detail Setting
Parameter Description Default Setting
Auto Zoom (Platen) Select whether or not a Zoom setting is
automatically selected when a paper
tray is selected (except when “Auto Pa-
per Select” is set) while a document is
placed on the original glass.
OFF
Auto Zoom (ADF) Select whether or not a Zoom setting is
automatically selected when a paper
tray is selected (except when “Auto Pa-
per Select” is set) while a document is
loaded into the ADF.
ON
Select Tray when APS
OFF
Select which paper tray is selected when
the “Auto Paper Select” setting is can-
celed.
• Tray Before APS ON:
The paper tray that was being used
before the “Auto Paper Select” setting
was selected is selected.
• Default Tray:
The 1st tray is used.
Tray Before APS ON
Select Tray for Insert
Sheet
Select the default paper tray loaded with
paper for the cover pages.
Tray 2
Print Jobs During Copy
Operation
Select whether or not print data or fax
data can be accepted for printing while a
copy operation is being performed.
• Accept:
Print data and fax data can be accept-
ed and printed.
• Receive Only:
Print data and fax data is printed after
the copy operation is finished.
Accept
To Next Page
Loading...
Need help?
General