12
Utility
12-56 d-Color MF25
12.7 Adjusting the finisher
!
Detail
For details on the “Fold & Staple” setting, refer to “To bind copies at the
center (“Fold & Staple”)” on page 3-82.
Adjusting the center stapling position
The stapling position when printing with the “Fold & Staple” function can be
adjusted.
0 Before making any adjustments, use the “Fold & Staple” function to print
a single sample copy. Perform the adjustment while checking the sample
that was created.
1 Display the Administrator Setting screen.
– For details on displaying the Administrator Setting screen, refer to
“Displaying the Administrator Setting screen” on page 12-45.
2 Touch [1 System Setting].
The System Setting screen appears.
3 Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4 Touch [3 Finisher Adjustment].
The Finisher Adjustment screen appears.
5 Touch [1 Center Staple Position].
The Center Staple Position screen appears.
To Next Page
Loading...
Need help?
General