Basic copy operations
3
d-Color MF25 3-15
Scanning a multi-page document from the original glass
When making double-sided or combined copies using the original glass,
place each page of a multi-page document on the original glass to scan it.
The following procedure describes how to place single-sided document
pages on the original glass to make double-sided copies.
1 Lift open the original cover, or the ADF if it is installed.
2 Position the first page or the first side of the document face down onto
the original glass.
– For details on positioning the document, refer to “To place the doc-
ument on the original glass” on page 3-11.
3 Close the original cover, or the ADF if it is installed.
4 In the Basic screen, touch [Simplex/Duplex].
The Simplex/Duplex screen appears.
When loaded in the
w orientation.
When loaded in the
v orientation.
To Next Page
Loading...
Need help?
General