3
Basic copy operations
3-16 d-Color MF25
5 Touch [1%2], and then touch [OK].
The screens that appear differ depending on the options that are in-
stalled.
6 Press the [Start] key.
Scanning begins.
7 Load the next batch of the document, and then press the [Start] key.
– Repeat this step until all pages of the document have been
scanned.
– The amount of memory available can be checked beside “Memory”
in the upper-right corner of the Basic screen.
– To delete the image data, press the [Stop] key, and then delete the
job. For details, refer to “Stopping scanning/printing” on page 3-86.
To Next Page
Loading...
Need help?
General