2
Before making copies
2-60 d-Color MF25
A maximum of 10 overhead projector transparencies can be loaded into
the bypass tray.
Before loading envelopes, press them down to make sure that all air is
removed, and make sure that the folds of the flaps are firmly pressed,
otherwise the envelopes may become wrinkled or a paper misfeed may
occur.
When loading envelopes, load them with the flap side up, as shown in the
illustration. If the envelopes are loaded with the flap side down, a paper
misfeed may occur. The flap side of envelopes cannot be printed on.
To Next Page
Loading...
Need help?
General