Basic copy operations
3
d-Color MF25 3-5
4 Using the keypad, type in the desired
number of copies.
– If the number of copies was in-
correctly entered, press the [C]
(clear) key in the keypad, and
then specify the correct number
of copies.
5 Press the [Start] key.
– To stop the copy operation being
performed, press the [Stop] key.
For details, refer to “Stopping
scanning/printing” on page 3-86.
– The next copy operation can be
queued while a copy operation is
being performed. For details, re-
fer to “Scanning the next docu-
ment to be copied while a copy job is being printed (next job
reservation)” on page 3-84.
To Next Page
Loading...
Need help?
General