Olivetti d-Color MF25 User Manual

3
Basic copy operations
3-70 d-Color MF25
The following procedures describe how to select Finishing settings.
2
Reminder
The Staple settings are available only if optional finisher FS-603 or finish-
er FS-501 is installed.
The Punch settings are available only if punch kit PK-501 is installed on
optional finisher FS-603.
Staple Select one of these settings to bind the copies with a staple in
the corner or with two staples.
Punch Select this setting to punch holes (4 holes) in the copies for fil-
ing them.
Finishing Setting Description

Olivetti d-Color MF25 Specifications

General

Brand	Olivetti
Model	d-Color MF25
Category	Copier
Language	English