d-Color MF25 x-21
Adjusting copies according to the image quality of the original
The copies can be adjusted according to the image quality of the document.
For details, refer to “Loading documents with small print or photos (Original
Type settings)” on page 3-53 or “Adjusting the print density (Density set-
tings)” on page 3-58.
Inserting paper between copies of overhead projector transparencies
In order to prevent overhead projector transparencies from becoming stuck
to each other, a page (interleaf) can be inserted between the transparency
copies.
For details, refer to “Inserting paper between overhead projector transparen-
cies (“OHP Interleave” function)” on page 8-3.
Adding a cover page
Cover pages can be added to copies, or copies can be made using different
paper (for example, colored paper) for only the cover pages.
For details, refer to “Adding cover pages (“Cover Mode” function)” on
page 8-6.
To Next Page
Loading...
Need help?
General