4
Additional copy operations
4-12 d-Color MF25
4 Use the keyboard that appears in the touch panel to type in the name
of the copy program.
– A name of up to 16 characters can be specified for the registered
copy program. (For details, refer to page 13-3.)
5 After typing in the name, touch [OK].
– The copy program can be given the same name as a copy program
that has already been registered.
The Recall Copy Program screen appears again. The copy program is
registered and a button with the entered copy program name appears.
?
Can the copy program name be corrected?
% To change the entered copy program name, touch the button
whose name is to be changed, and then touch [Edit Name]. The Edit
Name screen appears. Return to step 4.
?
Can the specified settings for a copy program be checked?
% To check the programmed copy settings, touch the button for the
desired copy program, and then touch [Check Job]. For details, re-
fer to “Copying with programmed copy settings (Mode Memory)”
on page 4-15.
To Next Page
Loading...
Need help?
General