6
Specifications
6-4 d-Color MF25
*1
There are five Foolscap sizes: 220 mm × 330 mm, 8-1/2 × 13 w, 8-1/4
× 13 w, 8-1/8 × 13-1/4 w and 8 × 13 w. Any one of these sizes can be se-
lected. For details, contact the technical representative.
*2
The indicated spaced requirements represent the space required to ful-
ly extend the bypass tray.
*3
3 mm only when receiving faxes
*4
4.2 mm only when printing
In order to incorporate improvements, these product specifications are sub-
ject to change without notice.
Warm-up time Less than 110 seconds (at room temperature (23 degrees Cel-
sius))
Image loss width Leading edge: 4.2 mm; Trailing edge: 4.2 mm
*3
;
Rear edge: 3 mm
*4
; Front edge: 3 mm
*4
First copy Full color: 11.7 seconds or less
Black: 8.4 seconds or less
Print speed Full color/black: 13 ppm (A3 w), 14 ppm (B4 w), 25 ppm
(A4 v), 16 ppm (A4 w ), 25 ppm (B5 v), 14 ppm (B5 w), 25 ppm
(A5 v), 19 ppm (A5 w) (using the 1st tray)
Magnification ratios ×1.0 (full size): ×1.000 ± 1.0% or less
Enlarge: ×1.154, ×1.224, ×1.414, ×2.000
Reduce: ×0.866, ×0.816, ×0.707, ×0.500
Minimal (×0.930)*
Zoom: ×0.250 to ×4.000 (in 0.001 increments)
Stored zoom ratios: 3
* “Minimal” zoom ratio (×0.900 to × 0.999)
Multiple copies 1 to 999 sheets
Density control Copy density: Manual (9 levels); Background density: Auto-
matic and manual (9 levels)
Power requirements 220 to 240 V, 10 A, 50 Hz
Power consumption Less than 1,500 W
Dimensions 653 mm (W) × 755 mm (D) × 771 mm (H)
Space requirements
*2
823 mm (W) × 755 mm (D)
Memory (available hard disk
space)
512 MB (40 GB)
Weight Approx. 94 kg
Specifications