To Next Page

To Previous Page

Application functions

d-Color MF25 8-43

What happens when “Auto” is selected?

% The factory default setting is “Auto”. Touch [Auto] to automatically

determine the binding position according to the orientation of the

loaded document. If the document length is 297 mm or less, a bind-

ing position along the long side of the paper is selected. If the doc-

ument length is more than 297 mm, a binding position along the

short side of the paper is selected.

4 Using the keypad, specify the margin width.

– If “None” is selected, the margin width is set to 0 mm. When making

double-sided copies, the image orientation can adjusted without

creating a filing margin.

What happens when a value outside of the allowable range is spec-

ified?

% The message “Input Error” appears. If “Input Error” appears or if the

filing margin was incorrectly entered, press the [C] (clear) key in the

keypad, and then specify the correct value.

How can the entered margin position be corrected?

% Without changing the margin width, change the margin position.

5 Touch [OK].

6 If necessary, specify any other copy settings.

7 Using the keypad, type in the desired number of copies.

8 Press the [Start] key.

Olivetti d-Color MF25 User Manual

Questions and Answers: