Utility
12
d-Color MF25 12-25
2
Reminder
If user authentication or account track operations are being performed,
they will be canceled after 1 minute, even if the “System Auto Reset” pa-
rameter has been set to “OFF”. However, the Enlarge Display mode is not
canceled when the “System Auto Reset” parameter is set to “OFF”.
Auto Color Level Adjustment
Power Save Setting
2
Note
If the “Administrator Security Level” parameter in Administrator mode
was set, [Power Save] does not appear.
!
Detail
For details on the “Administrator Security Level” parameter, refer to “Se-
curity setting” on page 12-44.
Description Default Setting
Adjust the reference level for detecting a color or black-and-white
document when the “Auto Color” setting is selected. The reference
level can be set to one of 5 settings.
3 (standard)
Parameter Description Default Setting
Low Power Mode Set-
ting
Specify the desired length of time (be-
tween 10 and 240 minutes) until the ma-
chine enters Low Power mode.
15 minutes
Sleep Mode Setting Specify the desired length of time (be-
tween 15 and 240 minutes) until the ma-
chine enters Sleep mode.
30 minutes
To Next Page
Loading...
Need help?
General