Olivetti d-Color MF25 User Manual

12
Utility
12-30 d-Color MF25
2
Note
If the “Administrator Security Level” parameter in Administrator mode
was set, [Auto Magnification Selection (Platen)], [Auto Magnification Se-
lection (ADF)], [Specify Default Tray when APS Off], and [Select Tray for
Insert Sheet] do not appear.
If the “Administrator Security Level” parameter in Administrator mode
was set to “Level 2”, [Print Jobs During Copy Operation] does not ap-
pear.
!
Detail
For details on the “Administrator Security Level” parameter, refer to “Se-
curity setting” on page 12-44.
Auto Magnification Se-
lection (Platen)
Select whether or not a Zoom setting is
automatically selected when a paper
tray is selected (except when “Auto Pa-
per Select” is set) while a document is
placed on the original glass.
OFF
Auto Magnification Se-
lection (ADF)
Select whether or not a Zoom setting is
automatically selected when a paper
tray is selected (except when “Auto Pa-
per Select” is set) while a document is
loaded into the ADF.
ON
Specify Default Tray
when APS off
Select which paper tray is selected when
the “Auto Paper Select” setting is can-
celed.
• Tray Before APS ON:
The paper tray that was being used
before the “Auto Paper Select” setting
was selected is selected.
• Default Tray:
The 1st tray is used.
Tray Before APS ON
Select Tray for Insert
Sheet
Select the default paper tray loaded with
paper for the cover pages.
Tray 2
Print Jobs During Copy
Operation
Select whether or not print data or fax
data can be accepted for printing while a
copy operation is being performed.
• Accept:
Print data and fax data can be accept-
ed and printed.
• Receive Only:
Print data and fax data is printed after
the copy operation is finished.
Accept
Parameter Description Default Setting

Olivetti d-Color MF25 Specifications

General

Brand	Olivetti
Model	d-Color MF25
Category	Copier
Language	English