Omron CQM1 - System Configuration

31
System Configuration Section 1-2
1-2 System Configuration
The following are CQM1H/CQM1 system configuration examples with G730
Interface Units.
Configuration with One Master
Note 1. Switches on the Master allow input and output to be independently set to
2 words (32 points) or 1 word (16 points). Connect Slaves according to the
set number of points.
2. If both input and output are set to 2 words (32 points), up to eight Input
Units and eight Output Units can be connected, if 4-point Slaves are used.
Master (32 input points/32 output points max.)
RS-485, 200 m max.
G730-VI (input model) G730-VO (output model) G730-RI (input model) G730-RO (output model)
Switch Sensor Lamp ValveSwitch
CQM1H/CQM1