Omron CQM1 - Connecting Devices; Analog Power Supply Units; Cpu; System Configuration

83
System Configuration Section 1-2
1-2 System Configuration
The Analog Input Unit is mounted to the CQM1H/CQM1 CPU as shown in the
following illustration.
• The Analog Input Unit and Analog Power Supply Unit are mounted to the
CPU, just like I/O Units.
• The Analog Input Unit can be mounted either on the left or right of the
Analog Power Supply Unit.
• Refer to 3-1 Settings for the wiring of the Analog Input Unit and Analog
Power Supply Unit.
Note Power must be supplied to the Analog Input Unit from the Analog Power Sup-
ply Unit and CQM1H/CQM1, otherwise the Analog Input Unit will not operate.
1-3 Connecting Devices
1-3-1 CPU
The Analog Input Units can be mounted to the following CPUs.
1-3-2 Analog Power Supply Units
Power can be supplied to the Analog Input Unit from the following Analog
Power Supply Units.
Power Supply Unit I/O Unit
Analog Power Supply Unit
Analog In-
put Unit
I/O Unit
CPU
Sensors
Name Model
CQM1H-series CPU CQM1H-CPU11
CQM1H-CPU21
CQM1H-CPU51
CQM1H-CPU61
CQM1-series CPU CQM1-CPU11-E
CQM1-CPU21-E
CQM1-CPU41-EV1
CQM1-CPU42-EV1
CQM1-CPU43-EV1
CQM1-CPU44-EV1
Model Remarks
CQM1-IPS01 Connects to a single Analog Input Unit.
CQM1-IPS02 Connects to a maximum of two Analog input Units.