10-34
Param-
eter
No.
Regis-
ter No.
(Hex)
Name Description Set-
ting
range
Unit
of
set-
ting
Default
setting
Changes
during
opera-
tion
Ref-
er-
ence
page
n178 01B2 Fault log Used to display the four most recent
fault recorded.
Display
* The most recent fault is indicated
by “1.”
* This parameter is monitored only.
Fault
generation
item
--- --- --- --- 6-48
n179 01B3 Software
number
Used to display the software number
of the Inverter for OMRON’s control
reference use.
* This parameter is monitored only.
--- --- --- --- ---
List of Parameters Chapter 10
To Next Page
Loading...
