Omron SYSDRIVE 3G3MV SERIES User Manual

2-41
Note To satisfy LVD requirements, the Inverter must be protected with a line breaker in case a short-cir-
cuiting accident occurs. When using a single line breaker to be shared with other Inverters or
devices, make sure that the Inverters and devices will be fully protected if there is a one-point
short-circuit, otherwise the Inverters and devices may be damaged.
The frequency reference power supply (FS) of the Inverter is of basic insulation construction. When
connecting the Inverter to peripheral devices, be sure to increase the degree of insulation.
Design Chapter 2

Omron SYSDRIVE 3G3MV SERIES Specifications

General

Model	SYSDRIVE 3G3MV SERIES
Category	Inverter
Input Frequency	50/60 Hz
Output Frequency	0.1 to 400 Hz
Cooling Method	Forced Air Cooling
Input Voltage	200 to 240 VAC, 380 to 480 VAC
Horsepower Range	0.1 to 15 HP
Power Range	0.1 to 11 kW
Overload Capacity	150% for 60 seconds
Braking Unit	Built-in
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication	RS-485
Ambient Temperature	-10 to 50°C
Storage Temperature	-20 to 65°C
Humidity	5 to 95% RH (non-condensing)
Vibration	5.9 m/s² or less
Voltage Class	200V, 400V