lé^i= lñÑçêÇ=fåëíêìãÉåíë=mä~ëã~=qÉÅÜåçäçÖó= System Manual
following it will move down the list by one place. You can then drag another step
from the Step Library list into the now vacant field.
6) When all steps have been added, enter a time into the Data Log Interval field,
then enter a name for the recipe in the Recipe Name field. Finally, select the SAVE
button.
bafq=^=ob`fmb=
To edit a recipe, use the following procedure:
1) Select the LOAD button, then select the recipe to be edited.
2) In the Step Commands pop-up menu, click on the Edit Step button, then edit the
process parameters as required. Note that editing a recipe step will not affect the
associated step, i.e. a step having the same filename, in the Library of Available
Steps.
3) To remove a step from the list, click on it to highlight it then select the DELETE STEP
button from the Step Commands pop-up menu. Any further steps will move up the
list by one place.
To add a step before an existing step, click on the existing step then select the INSERT STEP
button. The selected step and all those following it will move down the list by one place. You
can then drag another step from the Step Library list into the now vacant field.
Operating Instructions
Generic (OpAL Plasma) Issue 1: Oct. 07 Page 5-26 of 60 Printed: 06 November 2007 09:42
To Next Page
