Philips Efficia DFM100 - Installing Software

Internal Assemblies — Main Chassis 4: Repair
125
6 Enter the serial number using the Smart Select Knob to scroll through the letters and numbers. Press
the Smart Select button to complete each selection.
Select Cancel or Backspace to cancel a selection.
7 Scroll through the list and select Done when you have finished entering the serial number.
CAUTION: Once you have entered the correct serial number, do not change it. If you clear or change the serial
number, the options are cleared and you must re-enter the correct serial number and the options key.
Installing Software
See “Software Upgrades” on page 19 for details on software installation.
 To install software onto the device or to change the device’s language:
1 Be sure both an AC power module and battery charged to at least 20% are in place.
2 Tu r n t h e T h e r a p y K n o b t o Monitor.
3 Enter the Service Mode
4 Insert the Software Support flash drive into the USB port.
5 From the Service Mode Main menu, select Software Upgrade.
Make sure the software release and language displayed on the screen are correct.
6 Press the
Smart Select Knob. The software installation starts.
Figure 100 Entering Serial Number







EtCO2 Module
Printer Module


SpO2 Module

SpO2 Module

Therapy Board






Main Processor Board








