1: Introduction Export Device Info
18
Export Device Info
You can export all device logs (hardware error log, software error log, Op Check summary, Op Check
details and Auto Test Summary) of the Efficia DFM100 from the Export Device Info menu option.
To export the device information:
1 Make sure a battery charged to at least 20% is in place, or that external power is connected.
2 Insert the Philips USB Data Drive (989803171261) to the DFM100.
3 Access the Service Mode Main menu as described in “Accessing Service Mode” on page 15.
4 From the Service Mode Main menu, select Device Info.
5 From the Main menu, select Export Device Info.
6 From the Export Device Info menu, select the option you prefer.
Other Resources
For additional information on the Efficia DFM100, refer to the following Learning Products:
• Efficia DFM100 Instructions for Use
• Efficia DFM100 Service Web-based Training
Other documents can be found on the Philips website at:
http://www.philips.com/ProductDocs.
To Next Page
Loading...