4: Repair External Assemblies
82
Labels
There are three groups of labels for the Efficia DFM100:
• the Instruction label
• the Primary label, and
• the Optional Key labels (optional)
Instruction Label
The Instruction Labels include Measurement Module Labels, Control Panel Labels and Softkey Labels.
The Measurement Module Labels include six different Measurement Module labels for different option
sets. The Control Panel Labels include four labels for devices with and without pacing or defibrillation.
The Softkey Labels include two labels with or without characters on it. Make sure to order the correct
localized label. (see “Label Sets” on page 183) and place the correct labels on the device.
NOTE: When perform the product upgrade in field, the new function measurement module label will
pre-affixed to measurement assembly.
The Label Set contains the following three kinds of label for each language (see “Label Sets” on page 183
for part numbers):
• Die-cut Control Panel labels (Total 4)
• Softkey labels (Total 3)
• High Voltage Warning label (Total 1)
Figure 48 Instruction Labels
Control Panel labels
for different options
Measurement
Module labels
for different
options
Softkey labels for different options
To Next Page
Loading...