Device Information 1: Introduction
17
Device Information
You can print all detailed information of the Efficia DFM100 on serial number, software versions,
options, printer, boards and module levels, and internal memory card capacity from the Print Device
Info menu option.
You can also check all the information in Service-Main screen in service mode.
To print the device information:
1 Make sure a battery charged to at least 20% is in place, or that external power is connected.
2 Tu r n t h e T h e r a p y K n o b t o Monitor.
3 Press the Smart Select knob to access the Main menu.
4 From the Main menu, select Other.
5 From the Other menu, select Print Device Info.
Detailed information about the device is printed.
NOTE: Run an Operational Check after you have updated software, enabled an option, or performed a repair to
update the device information.
Primary Label
The Efficia DFM100 ships with a primary label shown in Figure 19 affixed to the bottom or the back of
the Rear Case.
Figure 19 Primary Label
OPT:
List of options installed on the device
SN: CNywwnnnnn:
y – last digit of the year of manufacturing
ww – week numbers of the year of
manufacturing
nnnnn – unique number
OPT Key:
unique number matches the current
options installed on the device
Input after software upgrade or language
setting
To Next Page
Loading...