Philips Efficia DFM100 - Page 137

Internal Assemblies — Main Chassis 4: Repair
127
2 Enter the options key using the Smart Select Knob to scroll through the letters and numbers. Press
the Smart Select Knob to complete each selection.
Select Cancel or Backspace to cancel a selection.
When the options key has been entered, the corresponding product options are displayed.
3 Select
 when you have finished entering the options key.
4 Repeat Step 2 through Step 3 for each options key.
5 Check the information on the screen to ensure it is correct.
CAUTION: Once you have entered the correct serial number, do not change it. If you clear or change the serial
number, the options are cleared and you must re-enter the correct serial number and the options key.
6 Run an Operational Check.
7 Review the Operational Check results to ensure all tests have passed.
See “Operational Check” on page 36.
8 Print the Device Info to ensure the product version and language are correct.
See “Device Information” on page 17.
Figure 102 Enabling Options







EtCO2 Module
Printer Module


SpO2 Module

SpO2 Module

Therapy Board






Main Processor Board







