Philips Efficia DFM100 - Internal Repairs; Verification Test Equipment

4: Repair Internal Assemblies — Main Chassis
142
7 Connect the fan cables to J12 and J13 on the Therapy PCA, see Figure 88 and Ta ble 3 0.
8 Install the Main PCA Module. See “Assembling the Main Chassis” on page 118.
9 Install the Main Chassis. See “Separating Main Chassis and Rear Case” on page 113.
10 Close the Case. See “Closing the Case” on page 149.
 To Complete the Replacement
 Run Performance Verification and Safety testing as described in the “Performance Verification”
chapter.