About ST80i Documentation
ST80i Stress Test System Instructions for Use 1-3
ST80i interfaces with a treadmill, ergometer, or as part of a pharmacological study, and
captures four phases of a patient exercise test:
Pre-exercise
Exercise
Recovery (and Post-Recovery)
Report
About ST80i Documentation
Philips provides detailed instructional and reference materials to help you get the most out of
your ST80i System.
Available Documentation
The following documentation is available with the ST80i system:
Getting Started Sheet Introduces the product, lists the contents, and directs the user to the
installation materials and documentation.
ST80i Installation and
Configuration Guide
Describes how to set up the ST80i System, including hardware and
software. Also describes how to set up the trolley and how to
perform initial configuration of the software.
ST80i Instructions for
Use (IFU)
Provides detailed information about ST80i functionality. It
describes the operation of the product and includes all regulatory-
required labeling. This guide also includes troubleshooting and
maintenance information. The IFU is written for clinical
professionals. They are expected to have a working knowledge of
medical procedures and medical terminology as required for
monitoring potential cardiac patients.
Wireless Patient
Interface Module
Instructions for Use
Provides information about how to set up the Philips wireless
patient module and also includes all regulatory-required labeling.
Includes a troubleshootingchapter and a service/maintenance
chapter.
C-Alg STR
Physician’s Guide
Describes the ECG analysis program available on the ST80i
System, and the available report formats. Includes a high-level
description of the criteria logic.
ST80i Service Manual Provides guidelines for repair on specific parts as well as
information for how to order replacement parts.
To Next Page
Loading...
