Working with Reports
4-12 ST80i Stress Test System Instructions for Use
Real-Time ECG for One Lead
On the bottom of the Report screen, patient data is still captured for one lead. You can change
the lead by using the drop-down menu to the right.
Figure 4-6
Print Options
On the bottom of the screen, to the right of the real-time ECG, are two print options for the
current lead in view:
Print 12-Lead ECG Report
Start Rhythm Printing
When you click the
Print 12-Lead ECG Report button, you will get a printout of that segment
of the ECG.
When you click the
Start Rhythm Printing button, a rhythm strip begins printing. To turn off
Rhythm Printing, click this button again.
Current Heart Rate
The current heart rateof the patient is displayed on the bottom right section of the screen.
To Next Page
Loading...
