Report Screen
ST80i Stress Test System Instructions for Use 4-9
Print
You can use the Procedure bar’s Print button to print individual reports or the Final Stress
Report.
Before printing individual reports, you need to select a printer type. When using a laser
printer, the grid can be set to print a grid on standard paper. Individual reports can be printed
both before and after you save the report.
The type of individual reports that can be printed include:
Patient ID
Summary
Trend Graphs
Average QRS
12-Lead Resting ECGs
Rhythm Events
When printing a Final Stress Report, you can choose which individual reports to include and
the number of copies to print for each individual report. You can also print a complete Final
Stress Report. Regardless of settings, a summary report will always be printed on the first page
of a Final Stress Report.
See the section entitled “De-Identify the Report” on page 4-35 regarding how to print
individual reports as well as the Final Stress Report.
Confirm
Once you review and edit the results, you can then confirm the report before exporting. You
will, however, need the appropriate permission level to export the report.
In the Select Archive from List window, the test status is listed as follows:
Complete: all required fields are filled
Incomplete: any required field is not filled
Confirmed/Signed
Exported
NOTE A stress study report cannot be confirmed or exported to TMVue if the required patient fields are not
complete.
To Next Page
Loading...
