Specifications and Requirements
E-2 ST80i Stress Test System Instructions for Use
Table E-1 Minimum ST80i system requirements
Component Minimum Hardware/Software Specifications
Processor
Intel® Core™ i5-2400S (2.50 GHz, 6 MB cache, 4 cores)
Memory
4GB 1333 MHz DDR3 SDRAM
Hard disk
No less than 160 GB SATA; 7200 RPM
Display
The lowest resolution for each layout:
For 4:3, the lowest resolution is 1024 x768
For 16:9, the lowest resolution is 1280 x720
NOTE The display used with ST80i must meet UL/IEC 60950-1
Safety Standards for Information Technology Equipment.
Network
The PC’s LAN interface should support IEEE 802.3
compliant 10M/100M/1000M Base-T(X) Ethernet
connections
LAN connection for laser printer is required
Optional LAN card for networking capabilities
CD-ROM drive
CD-RW/DVD combo drive
Operating system
Microsoft Windows 7 Professional
External Connectivity
The system must have the following external connections:
RS232-USB bridge
100-240V 50/60Hz AC Power input
Display output
LAN
Minimum of five (5) USB ports.
ST80i may use an external USB hub to extend the USB
ports for easier user access, if required.
Speaker output
Printer port.
To Next Page
Loading...
