Philips ST80i - Appendix C. Configuring and Using the Printer; St80 I Thermal Printer

C
C-1
Appendix AConfiguring and Using the Printer
The ST80i StressTest System supports the following different printers:
 ST80i thermal printer
 Network printer and local printer with Windows 7 drivers.
This appendix provides the following information:
ST80i Thermal Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1
Thermal Printer Dimensions and Specifications . . . . . . . . . . . . . . . . . . . C-2
Loading the Thermal Printer Paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-5
Setting Up the Thermal Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-6
Maintaining the Thermal Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-8
Inspecting the ST80i Thermal Printer . . . . . . . . . . . . . . . . . . . . . . . . C-8
Cleaning the ST80i Thermal Printer . . . . . . . . . . . . . . . . . . . . . . . . . C-8
Testing Printer Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-9
About the Supported LaserJet Printers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-10
For printer troubleshooting, see Appendix A, “Troubleshooting and Contacting the Response
Center.”
ST80i Thermal Printer
The ST80i thermal printer uses an eight-dot-per-millimeter (dpm) print head to print ECG
tracings and report data. Multiple print formats are supported.
The ST80i thermal printer includes:
 Hospital-grade power cord for connection to the isolation transformer
 USB cable for connection to the PC