The Patient Session
3-10 ST80i Stress Test System Instructions for Use
Figure 3-1 Report Screen
5
Click the Back button to return to the Select Patient from Worklist screen.
Select a Patient
When you are ready begin the patient session for a patient, select his or her name from the
Worklist.
To select a patient to begin the patient session
1
Place a checkmark by the patient's name.
2 Click OK or press Enter.
This brings you to the first screen of the test: Pre Exercise
Remote Find Tab
The Remote Find tab of the Select Patient from Worklist screen allows you to do a remote
search for a patient using several data points. With this feature, you are able to select one or
more entries from the search results list and save them to the Worklist.
To Next Page
Loading...
