Exporting Reports (Export Exam)
ST80i Stress Test System Instructions for Use 4-45
ST80i provides an indication that the stress data has been copied to an external location. Once
the Stress study data has been copied/moved to an external location, it may be deleted if
desired. If deleted, a pointer will remain in the stress study database indicating that the data
had been moved to external storage.
An alert indicates the exporting status, i.e. success or failure. If failure, the error code should
be also provided.
In addition to local storage, you can configure archived stress tests in multiple networked
locations. On a stand-alone single device with built-in stress study database deployment, all
stress test reports are permanently stored in the device database archive.
ECG Export Destination Sites
You may select the destination site from a list of preconfigured sites. Each preconfigured site
includes the following information:
Site label (user-defined)
If the site is on a network, address and other connection details (URL, node number, etc.)
The following remote system types are supported:
– TraceMasterVue
–ECG Gateway
Once the connection is established, all selected ECGs are transferred to the remote site. After
each ECG has been successfully transmitted, the information is logged.
If the connection fails, the operator is given an alert. No attempt is made to automatically retry
the operation.
A maximum of 100 Remote Sites profiles can be created without noticeable performance
degradation when switching screens.
To create remote sites, see the ST80i Installation and Configuration Guide.
To Next Page
Loading...
