The Patient Session
3-42 ST80i Stress Test System Instructions for Use
Printing During the Stress Test
At any time during the stress test, you can trigger real-time ECG (a real-time ECG is defined
as 10 seconds of ECG data) and continuous Rhythm printing using the icons displayed on the
Exercise screen. The time latency should be less than 7 seconds. You can also capture and
store events for later review and reporting. The events can be saved with notes and can be
printed with the context ECG data.
Arrhythmia events can trigger automatic printing with the context ECG, if configured. In
addition, you can also turn off the continuous printing both on the configuration and during the
test.
Printer Configuration
During the patient session, you have two print options:
ECG Print
Rhythm Print
Some print settings are preconfigured in advance while some can be changed during an
exercise stress test. The settings include:
Printer selection
Timing of Print
– ECG Print - by stage
– ECG manual - using the ECG Print button
– Rhythm Print manual - using the Rhythm Print button
Print layout
On the Config screen [System Settings System], you can preconfigure the printer for each
type of report:
Select ECG Report Printer:
–Off
– PDF Complete
– Microsoft XPS Document Writer
– Local Thermal Printer
Select Event Report Printer:
–Off
– PDF Complete
– Microsoft XPS Document Writer
To Next Page
Loading...
