Working with Archived Reports
ST80i Stress Test System Instructions for Use 4-43
View a Report
To view a saved patient report
1
Select the patient report by putting a checkmark in the box by the patient ID.
2 Select the View Report button.
The Report screen opens.
NOTE Double-clicking on the study record also brings up the report
Replay a Report
To replay the patient ECG from the Archive screen
1
Select the patient report by putting a checkmark in the box by the patient ID.
2 Click the Replay button.
The Patient Session is loaded, beginning with Exercise.
This option provides you with the ability to scan the entire ECG from start to end.
When reviewing the stored stress test, you can change the J+ms value and change the
reference ECG. The stress study data and configuration settings are saved in database.
Viewing Reports Saved as PDF Files
To view a PDF file
1
Exit the ST80i application.
2 From Windows Explorer, locate and select the directory where the file was exported.
3 Locate the file you want to review and double-click it.
Adobe Acrobat Reader automatically opens and displays the file.
4 Press Page Down and Page Up to navigate through the file.
If ST80i is connected to a printer, you can print the file by selecting File, then Print.
To Next Page
Loading...
