Physio Control LIFEPAK 15 - Page 184

LIFEPAK 15 Monitor/Defibrillator
Service Manual
Replacement Procedures
Reassembling the Case
Section Menu Section Contents Procedures Back Index
186
8
6. Install 14 new screws (201407-069); torque to 10.0 in-lb
using a P2 bit.
Figure 8.8—Screw locations
 To reassemble the case halves: (Continued) 13 steps, (Page 3 of 5)
screw
locations
screw
locations
screw
locations
screw
locations
Install 14 new screws in
rear of case